|
|
| |
您現在的位置: > 燃燒機配件 |
|
| 西門子VGG...系列高溫氣體單閥 |
| VGG...系列高溫氣體單閥
品牌：SIEMENS（西門子）
產地：德國 |
| 產品介紹 |
|
The VG... gas valves with their electrohydraulic SKP... actuators are designed for gas families I, II, III and air. They are used primarily in gas-fired combustion plant. The valves open slowly and close rapidly. All types of VG... gas valves can be combined with the available types of actuators. The actuator is fitted to the valve body by means of the 4 screws contained in the terminal compartment. The square flange can be turned in steps of 90°, thus providing 4 different mounting positions. The actuator can be fitted or replaced while the valve is under pressure. Sealing materials are not required.
-
These valves are normally closed one-way disk type valves.
-
Their stem is guided on both sides of the disk, thus ensuring precise alignment of the stroke as well as tight shut-off.
-
The closing force of the return spring is supported by the prevailing gas pressure.
-
The valves are available with profiled or flat disks and with or without stroke limitation.
-
An interchangeable strainer made of stainless steel protects seat and disk as well as downstream controls from dirt. |
| 型號表 |
| 口徑 |
閥體材料 |
運行承壓mbar |
流量（在壓差1mbar時）m3/h |
連接點數 |
型號 |
| 測試點RP1/4 |
點火燃?xì)饨涌?/FONT>G3/4 |
帶殼 |
不帶殼 |
| 沒有調節桿限位 |
有調節桿限位 |
沒有調節桿限位 |
有調節桿限位 |
| 1/2” |
壓鑄鋁 |
1200 |
4.8 |
4 |
- |
VGG10.154P |
VGG10.1541P |
- |
- |
| 3/4“ |
壓鑄鋁 |
1200 |
8.9 |
4 |
- |
VGG10.204P |
VGG10.2041P |
VGG10.204 |
VGG10.2041 |
| 1” |
壓鑄鋁 |
1200 |
13.3 |
4 |
- |
VGG10.254P |
VGG10.2541P |
VGG10.254 |
VGG10.2541 |
| 1-1/2“ |
壓鑄鋁 |
600 |
32.3 |
4 |
- |
VGG10.404P |
VGG10.4041P |
VGG10.404 |
VGG10.4041 |
| 2” |
壓鑄鋁 |
600 |
47.4 |
4 |
- |
VGG10.504P |
VGG10.5041P |
VGG10.504 |
VGG10.5041 |
| 3” |
澆鑄鋁 |
600 |
85.4 |
2 |
2 |
VGG10.804P |
VGG10.8041P |
VGG10.804 |
VGG10.8041 | |
| 技術參數 |
| 主要參數 |
| 閥門等級 |
A EN161 |
| 內部溫度 |
最大+60ºC |
| 氣體種類 |
燃?xì)忸愋?/FONT>1，2，3 | | |
| 環境條件 |
| 運輸環境 |
IEC 721-3-2 |
| 內部條件 |
class 2K2 |
| 機械條件 |
class 2M2 |
| 溫度范圍 |
-15...+60ºC |
| 濕度 |
<95% |
| 運行環境 |
IEC 721-3-3 |
| 內部條件 |
class 3K5 |
| 機械條件 |
class3M2 |
| 溫度范圍 |
-15...+60ºC |
| 濕度 |
<95% |
| 不得進水 | | | |
|
